Leading-tech laser:fiber coupled lasers and fiber coupling

DPSS Lasers

Diode Collimated Lasers

Fiber Coupled Lasers

Low Noise Lasers

SLM lasers

Lasers for Raman

Optics And Accessory

welcome to 2 leaves

LTL473S lasers is a temperature stabilized DPSS laser or diode lasers coupled with single mode (SM) or multi mode (MM) fiber or polarization maitained (PM) fiber. Fiber coupling could lower the M2 value of the DPSS lasers, especially diode lasers.

very low M2 value Gaussian beam out put,roundness up to 98%

high fiber coupling effiency , SM or PM fiber coupling effiency up to 60%

excellent beam pointing stability at a wide temperature dynamic range

Wavelength:

400~1200nm

Fiber Type

Mulit mode fiber

Single mode fiber

Polarization Maintaining fiber

Fiber Connector

PC-FC/PC, APC-FC/APC, SMA-SMA905

Fiber Length

0.5M, 1M, 3M

Mode Quality (M2)

<1.2

Beam Divergence, Full Angle

40mrad

Power Stability

3% (rms, over 2 hours, T= 25℃)

Collimator:

These collimators are designed to connect onto the end of an

FC/PC or SMA905 connector and contain an AR-coated aspheric

lens. They can collimate the beam after SM/MM fiber to 1.0mrad

and 0.5mrad. The collimators also can protect the fiber end from

dust.

Removable Fiber mount

There removable fiber mounts could be installed in the front of

our laser heads. The multimode fibers could be easilty removed

by customers.It keeps the high fiber coupling effciency, aslo

high beam quality could be obtained after fiber coupling.

Detailed Specification Download

fiber coupling edition